| PHYSICAL / MECHANICAL PROPERTIES | TRIAL METHOD | VALUE |
| Density | ISO 1183 | 0,937 g/cm3 |
| Water absorption | ISO 62 - a 23°C 50% r.h. | < 0,01% |
| Elongation at break | ISO 527 | 650% |
| Flexural elastic modulus | ASTM D790 | 300 MPa |
| Working temperature | - | - 20°C / +60°C |
TECHNICAL CHARACTERISTICS
High impact resistance - Good resistance to stress cracking - Totally recyclable - Good heat resistance - Medium flexibility
STANDARD MARKING:
| PEMD Ø4X6 LOT…./.... MADE IN ITALY
Marking is printed every 50 cm. Customized marking on demand
It is recommended not to mount the polyethylene tube with fittings that deform the end too much more than 15%. "Creep" problems may occur with unsuitable fittings.
SUITABLE FOR: compressed air, robotics, water transport and treatment, tools, paints, chemicals.
Login / Register 
